Best Tips: How to Clean Floor Grout without Scrubbing?

Floor grouting is basically a mixture of water, cement, and sand used for filling cervices, especially the gaps between the wall and floor tiles. These grouting between tiles makes the floor a beautiful, long-lasting, and durable effect.

But grouting between tiles gathers a lot of dust and dirt. So, you have to clean the floor grout to make the floor looks beautiful and clean. We all enjoy clean and shiny grout between tiles whether it is in the bathroom, kitchen, or living rooms.

Tiles make your house look beautiful but the dirt and dust which is gathered in the floor grout make your floor look dull, discolored, and moldy which is very embarrassing for you.

You tried a lot of cleaning methods or use a lot of cleaners to clean the grout of your floor but all these processes did not clean the grouting between tiles. So, I will thoroughly explain how to clean floor grout without scrubbing?

Why Dust Fill in the Floor Grout?

The floor, that has a high traffic area the grout of this floor gathers more dust and dirt than any other area. Grout is porous in nature that attracts dirt and dust and absorbs it. 

Sponges attract dirt and dust but one can quickly get rid of dirt and dust in sponges, on another hand, grout which makes it hard to get rid of the grime on the grout.

When you move your furniture you noticing that some parts of floor grout gather a lot of dust patches because these parts don’t expose to clean for a very long time. So, these parts need deep cleaning.

It could also be also a case when you are trying a new curtain placed in your bathroom and during this, you notice that there are lots of dirt patches that gather in the grout of your tiles.

These patches make your bathroom floor look dirty and moldy. So, you don’t have to feel embarrassed because this can happen to anyone.

You may need to let go the previous knowledge you have about removing the dust on the grout of your tiles. Most of the remedies were less effective and does not even work at all.

You know it’s an enormous pain to bend down on your knees and scrub those tiles. So, here is a solution in this article of all these problems.

But keep in mind, there is no way to get 100% clean grout between tiles of your floor without doing a bit of scrubbing. There are some best and most effective ways to clean the grout between tiles with minimal scrubbing effort.

Related Article: How to Clean Concrete Floors?

Best Ways: How to Clean Floor Grout without Scrubbing?

There are some of easiest ways to clean grout without scrubbing or with minimal scrubbing. There are several products which will help you to get rid of grime on your grout and make it glow with its natural color again.

You can use two ways to clean floor grout without scrubbing:

  1. Use DIY Cleaner to Clean the Floor Grout
  2. Use Chemical Cleaner to Clean the Floor Grout

Use DIY Cleaner to Clean the Floor Grout

There are some DIY cleaner to clean the grout between tiles which is given below:

Use Baking Soda and Peroxide

A mixture of baking soda and peroxide is very effective for cleaning grout. These two ingredients combine to form a potent foaming mixture that clean all the stains and brighten up the grout between the tiles of your floor.

Ingredients:

  • 1 cup baking soda
  • 1 cup hydrogen peroxide
  • 1tbsp dish soap(optional)

Direction:

  • Mix baking soda, hydrogen peroxide, and dish wash together.
  • Spread this mixture onto the stained grout.

(Tip: You can put this mixture into spray bottle and sprinkle it on your grout)

  • Let leave the mixture for at least ten minutes
  • Then scrub gently until all the strain or any discoloration starts to fade.

(Tip: You can use any small brush r toothbrush for scrubbing)

You can adjust the amount of ingredients according to the space of the floor. You can mix an equal amount of baking soda and hydrogen peroxide to make DIY cleaner that is a powerful and very effective cleaner.

Adding any dish wash is optional you can add while cleaning the kitchen because the floor of kitchen exposed to grease.

Baking soda gives soapy texture to mixture and has an alkali property which helps to remove all stubborn stains that stuck on your grout. Hydrogen peroxide act as strong oxidizing agent and has powerful disinfectant property. This mixture polishes the grout and removes all the strains.

Use Vinegar and Citrus Gentle Grout Cleaner

In the past era, the combination of vinegar and baking soda is used to clean all strains from the floor. You can also use this combination to clean grout between tiles by adding some other ingredient like citric acid.

Ingredients:

  • 1/2 cup baking soda
  • 1/6 cup white vinegar
  • 3 1/2 cup hot water
  • 1/3 cup lemon juice
  • Spray bottle

Direction:

  • Mix warm water, baking soda, lemon juice, and white vinegar.
  • Put this mixture into a spray bottle.
  • Spray this mixture on the stained grout.
  • Leave the mixture at least for an hour.
  • Then gently scrub the grout until all strains disappear.

Vinegar is the most affordable household cleaner. Baking soda is alkali in nature and an extremely good disinfectant and helps to remove all strain from your grout.

This DIY cleaner is recommended as safe for use because of the less combination of chemicals, it is safe for kids and also safe for adults.

Related Article: Does Steam Cleaning Damage Grout?

Use Chemical Cleaner to Clean the Floor Grout

There are some chemical cleaner to clean the grout between tiles of your floor without scrubbing which are given below:

Use Clorox Bleach

This is the most powerful grout cleaner. Bleach is a harsh cleaner both for you and your tiles. We don’t recommend using it. But it is a great way to wash the tiles of your bathroom that have been neglected for a long time. By using this bleach you can remove all stubborn stains from the grout of your floor tiles. Use Clorox bleach for cleaning tiles.

Direction:

  • Take undiluted compound and apply it on dirty grout
  • Wait for some time.

(Note: Don’t leave the bleach on your tiles for long time this may damage your tiles)

  • Then wash the floor with water.

We recommended you to use oxygen bleach before using chlorine bleach as it is a bit gentler. Be sure to ventilate your area well by opening windows and turning in fans before using bleach of any kind. Always use proper skin and eye protection!

Store-brought Grout Cleaner-Alkaline Cleaner

Alkaline cleaners are specially made for cleaning the floor grout while removing dirt and dust which is stuck in the grout of your floor. These cleaners involve manufacturer formulated cleaning solution.

Any cleaner you can use which is alkaline in nature because alkali nature of cleaner loosen all dirt and dust than you can remove it easily.

Alkaline cleaners can affect the human health so follow all instructions that is given on the cleaner bottle regarding bodily protection. Don’t leave the cleaner for long time this may affect your tiles and discolor the grout.

Use Polyblend

Poly-blend is basically a polymer-modified cement-based sanded grout. It is specially designed for grout cleaning. Poly-blend produces a hard, dense joint that resists cracking and shrinking.

It also removes stubborn stains and grime. It is a very effective product that cleans and whitened all kinds of the grout. This product is less harmful to human health and your tiles. It is almost safe to use it.

Direction:

  1. First of all mix the chemical with water.
  2. Take a brush (tooth brush or any brush) and dip in the mixture.
  3. Apply it along the grout lines.
  4. Leave this mixture for 10-15 minutes.
  5. Then gently scrub the grout by using any toothbrush or any bristle brush.
  6. Then remove the mixture with water.

The downside of using poly-blend is that it takes more effort to clean grout. You get on your knees and apply the mixture on the grout lines. If you combine peroxide with this mixture it removes all kinds of stains in the safest way as possible.

Quries about How to Clean Floor Grout without Scrubbing

What is the easiest way to clean floor grout?

Use can use warm water to clean floor grout and brush for scrubbing the stains.
You can use baking soda and peroxide mixture.
You can use any commercial product.

Is it possible to clean unsealed grout?

You can use a floor steamer for cleaning unsealed grout or you can use steam extraction cleaning for clean unsealed grout. Detergent and steam mixture is very helpful for cleaning unsealed grout because it loosens all dirt from the floor grout and you can easily clean it.

Does vinegar ruin grout?

The unsealed grout should not be cleaned with vinegar because vinegar will deteriorate the condition of the grout and make it discolored and dull.

Conclusion

There are numerous ways to clean floor grout without scrubbing. The methods mentioned above are the best and most effective for cleaning grout without scrubbing.

As you can see the DIY cleaner is the best and cheapest way to clean floor grout. Chemical cleaners are harmful to you and also to your tiles. You can clean the grout easily without scrubbing by using chemicals with some precaution. Now you know how to clean grout without scrubbing.

Read other blog post on our website to know about more about cleaning process.

Leave a Comment